Sketching on paper will definitely help you in fine-tuning your ideas. Maybe you have several by now, but putting them on paper will show you what works best.
Now you only need to print and add some finish to the project. Flip your graphics horizontally to ensure your stickers will print in the right orientation.
Scan your sketch or take a high-quality photo of it and import it into your document. Remember to clean it up a bit with the help of the contrast adjustment.
Peel off the backing on your stickers to use them. The vinyl backing will be on the opposite side of the over-laminate, on the back of the sticker design. Grab a corner of the vinyl backing with two fingers and peel it back until it’s completely off the sticker.
Place your sticker on a dry, flat surface.
Copy your sticker graphics multiple times all over your document, minding to keep the stickers away from the borders.
First of all, you will need a computer, access to an inkjet printer and an image editor. It doesn’t have to be Photoshop or Illustrator. Free software like GIMP or InkScape will do just fine.
To bring your concept to life, you need to create a document in the size of your printing paper, choosing a resolution of at least 300 pixels per inch and the CMYK color space.
Three Parts:Creating Your DesignPrinting out Your StickersLaminating and Cutting the StickersCommunity Q&A
Making your own stickers isn’t as hard as you may think, even if you’re adding another element to it like vinyl. It won’t take complicated software and expensive materials. All you need is a little patience and creativity!
After printing your stickers, apply the clear laminate over the vinyl sheet with the graphics facing up. Cut your stickers out with scissors or a trimmer.
Categories: Featured Articles | Making Stickers and Adhesive Labels
Paste the design you created in the new document. If you want to make multiple stickers of the same design, paste the design multiple times and arrange the copies in rows. Make sure none of the copies are in the margins of the template or they won’t print onto the paper.
Browse the Internet for some ideas. For starters, check sites like Flickr, DeviantArt or Pinterest or look at our previously published stickers.
With the Pen tool, trace over your sketch, moving your anchor points as you proceed. Vary your stroke width to emulate inking (this is fairly easy if you are using a vector graphics editor).
Look at other vinyl sticker designs for inspiration. Do an online search for “vinyl stickers” or “vinyl sticker designs.” Pay attention to what you like and don’t like about the different designs you see.
Try to find stickers that are similar to the ones you want to make. For example, if you want to make vinyl stickers to put on your laptop case, look for stickers other people have made to put on their computers.
This will give you an idea of what size and color your design should be.
A straightforward concept will work best, especially if you are a beginner at this. Don’t be afraid to keep things simple.
Load an inkjet printer with 8 x 11 inch (20.3 x 27.9 cm) vinyl printer paper. Load the paper into the printer’s paper tray so the print side (non-adhesive side) will be the side that the printer prints onto.
If you’re not sure whether to put the paper face up or face down in the tray, run a test sheet through the printer to check. You can find vinyl printer paper online or at your local office supplies store.
Use clear vinyl printer paper if you want the background of your stickers to be transparent.
Test on normal paper to make sure all the stickers fit properly and the print quality is as you wish before you use the inkjet vinyl.
Patrick’s Day Easter Fourth of July SHOP Nav Widget Area
An Image Editing Software (Krita is very good for professional art, but Paint or Gimp might come preinstalled on your computer)
Skip to primary navigation Skip to content Skip to primary sidebar Skip to footer
Don’t worry if you make mistakes at first. Just be patient and correct them. You can reuse the same settings to easily make more stickers in the future and have more fun!
You can easily print your own vinyl stickers at home using a few simple tools. Once you’ve designed your stickers on the computer using an image editing software, print them onto vinyl printer paper. Laminate your stickers to protect them from water and UV rays from the sun. When you’re finished, just peel off the backing on your stickers and they’ll be ready to use!
To get started, you need to find the right idea. Even if you don’t have one, you can come up with something by looking at other people’s work and taking inspiration from them.
Cricut is a good vinyl design program, but you have to buy a large machine. It also isn’t only for vinyl, it’s for many other things, too!
If you’re comfortable with it, you can start with digital drawing. If you are not a skilled artist, don’t worry. Your sketch doesn’t have to be perfect because you will be able to fix it through post-processing.
Quick Tip: Need stickers printed ASAP? Check out our reviews of the best sticker printing services. Prices start at just $0.15/sticker!
Add another element to your stickers by printing them on vinyl!
You don’t need a lot of stuff to make your stickers, but you do need to make all the necessary preparations in advance if you want to complete the project quickly.
Include your email address to get a message when this question is answered.
Use a pointed tool to scrape of the unwanted areas of sticker, then save or discard before applying the transfer film or paper.
We order print jobs from every major printer to test quality, value and more. See how.
A Computer or Tablet. Anything with a large enough screen and the correct software will do, but note that it must be able to print.
Thanks to all authors for creating a page that has been read 28,776 times.
Click the print preview button to see how your stickers will print. If any of the copies of your design are cut off in the margin, move them in further away from the edge of the template. Make sure none of the copies are overlapping.
Create your design on the computer using image editing software. If you don’t have Photoshop or Illustrator, use a free image editing software like GIMP. Recreate your sketched design using your software’s drawing and editing tools, or scan and upload your sketch and work from that.
If you’re making a colored design, use bold, vibrant colors that will show up well when printed. Make sure the resolution of your design is at least 300 pixels per 1 inch (2.5 cm).
Unless you want black and white stickers, select bold, attractive hues to add color to the sticker. Crisp, simple graphics will look more striking in the final product.
A Pencil or Pen (Note — You won’t be able to change your draft if you use a pen, so choose wisely)
Home Homepage About Us Contact Us Best of 2018 2018‘s Best Printing Services Business Cards Business Card Printing How To’s Business Card Templates Business Card Design Ideas T-Shirts T-Shirt Printing How To’s T-Shirt Templates T-Shirt Design Ideas Posters Poster Printing How To’s Poster Templates Poster Design Ideas Flyers Flyer Printing How To’s Flyer Templates Flyer Design Ideas Stickers Sticker Printing How To’s Sticker Templates Sticker Design Ideas Photos Photo Printing How To’s Photo Templates Photo Design Ideas Postcards Postcard Printing How To’s Postcard Templates Postcard Design Ideas Brochures Brochure Printing How To’s Brochure Templates Brochure Design Ideas YOU KNOW WE’RE AWESOME – FOLLOW US!
Apply an over-laminate sheet over your stickers. Peel back the backing at the top of the over-laminate sheet and line the top edge of the laminate up with the top edge of the vinyl paper. Use your fingers to press the laminate onto the vinyl paper so it sticks.
 You can find over-laminate online or at your local office supplies store.
Cut out the laminated stickers from the sheet of vinyl. Use a ruler and a craft knife to make precise straight cuts. If your sticker designs are rounded, use scissors to cut them out, or give them a square background.
Once all your stickers are cut out, discard any leftover paper scraps.
© Copyright 2016 · Pretty Lifestyle WordPress Theme by: PDCD
Open a new 8 x 11 inch (20.3 x 27.9 cm) document in your image editing software. If the software you’re using doesn’t let you specify the size when you open a new document, edit the size after you open the document.
Look for the size button in your software’s menu bar.
Sketch out your design on paper. Don’t worry about drawing all the details. You just want to get a basic idea of how your design will look before you attempt to make it on the computer. Make sure your design is small enough to fit on an 8 x 11 inch (20.
3 x 27.9 cm) piece of paper. If you’re just starting out making vinyl stickers, keep your design simple. If you’re having trouble coming up with a design, use graphics or images from online instead.
Print your design from the editing software onto a sheet of vinyl paper. Make sure the computer you’re using is set to print to the ink jet printer. Locate the print button in the image editing software and click on it.
Wait for the printer to print your stickers and then grab them from the printer.
You will also need adhesive vinyl sheets to print on, clear laminate to coat the stickers and scissors. A scanner or a camera is optional.
Peel back the rest of the over-laminate backing slowly. Press the laminate onto the vinyl paper as you go. Keep going until you’ve peeled off all the backing and the whole sheet of vinyl is laminated.
 To prevent air bubbles, use the edge of a ruler to press the laminate onto the vinyl paper.