Yes. One option is to use agar, which is very easy to find in Asian grocery stores.
Cut out the stickers. Use scissors to cut out the designs you printed or drew. Cut simple square shapes or use scrapbook scissors to give the designs interesting edges. Space all designs of stickers at least 1/8 an inch apart to prevent cutting accidents.
When using tacky sticker sheets, simply pull back the protective liner, revealing the glue. Place the back of your sticker to the glue. Press down to make sure the sticker adheres to the glue. Then, peel the sticker – the glue will now be on the back of the sticker.
Stick on any surface. You will need to use the sticker right away because there is no protective cover on the back. You can cut slightly wide to leave a white border around the image, or you can cut it close.
More advanced sticker creators sometimes leave no border and cut with an Exacto-knife.
After you have thawed your glue, take a small paintbrush and lightly paint the back of your paper and let it dry completely. After that, you can just lick the back of your sticker, as if it were a stamp, and adhere it to your surface of choice.
If you want to make your own stickers, draw and decorate your design on a thin piece of paper, then cut out your design into the shape you want. In a small bowl, combine plain gelatin, boiling water, sugar or corn syrup, and a few drops of vanilla. Turn the stickers upside down on a sheet of waxed paper and paint the backs with a light coating of the glue mixture. When you’re ready to stick the stickers to a surface, just lick the back, like you would a stamp, and press them down!
It should give you a reasonable amount for 10-15 small stickers.
Awesome picture! Tell us more about it? Click here to share your story.
Items needed: • Image printed using water-resistant ink (think magazines, books, or flyers)• Scissors• Packing tape• A coin
Get the most bang for your buck with die-cut sticker pages. With die-cut sticker pages, you can fit all the stickers you need on one page. An efficient way to save some coin if you need multiples of your custom stickers. Simply upload all your images into our editor, tell us how many pages you need, and you’re done. Since die-cut stickers on pages remove easily, they are perfect if you have a lot of decorating to do for a special celebration or party, need several types of labels for your products, or if you need a simple way to get some eye-catching office décor.
Of course, if you just want to design a Custom Sticker and don’t have the time or resources to make it yourself, we can make them for you. Simply select the type of sticker you want (Roll Labels, Die-Cut Single, &c.), upload your design into our Sticker Editor and then finalize your order. At StickerYou we can help make your ideas stick; any shape, any size, any quantity.
StickerYou Office Hacks Make Your Message Stick With Custom Decals Design Hacks with StickerYou’s Sticker Maker Show Your True Colours with Pride Which Sticker Material is Right for You? Creative Advertising with Custom Floor Decals Introducing: Custom Badges at StickerYou!
Design the stickers. When you’re making your own stickers, the sky is the limit in terms of design. Use whatever drawing materials you want: colored pencils, markers, pastels, crayons, anything. Make sure your drawing utensil is not washable.
 Draw the sticker designs on a thin piece of paper, such as loose leaf paper or paper from a notepad. Consider these creative options when you’re thinking up sticker designs: Draw a self-portrait, or portraits of your friends or pets.
Cut out neat pictures and words from magazines and newspapers. Print out pictures you find online, or pictures you’ve uploaded to your computer. Print them on thin computer paper, rather than photo paper, for best results.
Use sticker sheets you find online with premade stickers you can print out. Make pictures using rubber stamps. Decorate the picture with glitter.
Get other great ideas, inspiration and sweet deals delivered directly to your inbox by signing up for our newsletter here.StickerYou blog posts are written and published by members of the StickerYou team at our headquarters, located in the beautiful city of Toronto, Canada.
Cut out the stickers. Use scissors to cut out the designs you drew or printed. Make the stickers as large or as small as you like. For an added touch, use scrapbook scissors that cut decorative designs around the edges.
Try using a paper puncher to make heart, star, and other shaped stickers from patterned paper.
StickerYou allows you to make and order die-cut custom stickers in any size, shape and quantity. You can upload your image or logo, or create and customize from thousands of images and/or use our Sticker Editor. Browse the categories below and find just the right application for your stickers. All your custom sticker orders are printed on the highest quality weather-proof vinyl materials.
Four Methods:Making Glue StickersMaking Packing Tape StickersMaking Sticker Paper StickersMaking Stickers Other WaysCommunity Q&A
Items needed: • 1 packet of gelatin• 4 Tbsp of boiling water• 1 Tsp sugar• A few drops of vanilla (for flavor).
Include your email address to get a message when this question is answered.
Make stickers with contact paper. Draw your designs on the shiny side of the contact paper using sharpies. Cut out the stickers around your designs. Peel off the paper backing and stick to whatever surface you choose.
 Contact paper stickers are translucent. They are good to use on colored construction paper.
When the paper is all gone, let the sticker dry completely so that the tape adhesive becomes sticky again. Once it is dry it is ready to be affixed to your surface. The result of this method would be very similar to Custom Packing Tape.
Shop Stickers Labels Temporary Tattoos Decals Iron-Ons Magnets Patches Badges Sticker Maker Shop by Interest Make & Print™ Company Product Information Why StickerYou? Promo & Reseller Sponsorships Student Discount Blog Stay Connected Marketplace Careers About Us Support Pricing Shipping Return Policy Art Services Packaging Solutions Free Samples Contact Us FAQs Create Get a Quote Login Cart0
These products can be bought in a craft store like Jo-Ann, Michael’s, Beverly’s, etc.
The mini-version of a sticker-page, kiss-cut sticker singles are your custom logo or design but on one mini page. Kiss-cut sticker singles work best with intricate designs, and specific info because all edges are protected by its vinyl backing. They’re awesome as handouts at networking or events or tradeshows because they’re great for getting the business info you need your customers to know in a convenient size (and without a minimum order quantity, ordering in bulk is a breeze). They also work well for personal use, such as promoting your online following or inexpensive memorable gifts for any occasion.
Run the stickers under warm water. One at a time, run them under the water with the paper side facing the stream of water until it begins to fall apart. The ink won’t wash away, but the paper should completely dissolve.
You can help it along by scratching some away. Make sure you get all of the surfaces of the tape wet instead of only focusing on one spot. If you focus on only one part, only that part will be visible.
If the paper won’t come off, continue running it under warm water. An alternate way is to submerge the sticker in a bowl of warm water. Place the sticker completely in the water and allow it to soak for a few minutes.
Paint the stickers. Turn the stickers upside down on a sheet of waxed paper or aluminum foil. Use a paint brush or a pastry brush to paint the backs of the stickers with the glue mixture. When you’re finished, let the mixture dry completely.
There’s no need to soak the stickers completely with the adhesive; just brush on a light coating. Make sure the stickers are completely dry before you use them. Store your stickers in a plastic bag or a box until you are ready to use them.
Are you looking for a new craft project? Try making some stickers! Stickers are easy to make using materials you probably already have around the house; you can also make professional-looking stickers by using sticker paper, which is available at many office supply and craft stores. Learn how to make stickers in three different ways: using homemade glue, packing tape, or sticker paper.
If you want to be sure it is completely dry, leave it overnight.
Cut stickers out of magazines or print your own designs. For this method, you’ll need designs that have already been printed on paper with water-resistant ink. You can use shiny magazines or books, or you can experiment with the ink your printer uses to print out designs from your computer.
If you are printing pictures, make a test copy to get a little wet before you try to make a print sticker. Cut out pictures and words you like using a pair of scissors. When choosing pictures, think about the width of the packing tape.
Each sticker should be able to fit on one strip. The picture can be the size of the packing tape or smaller. If you want a larger sticker, you will have to place two pieces of packing tape stacked on each other.
This can be tricky. You will have to align the tape so that they overlap just a little bit so you have no paper peeking through. This can mess up your sticker. You will have a seam where the two pieces of tape meet.
Let the stickers dry. Once the paper is gone, let the stickers completely dry so that the tape’s adhesive will become sticky again. Use scissors to trim away any extra tape around the design, then stick the stickers to the surfaces of your choice.
If it contains any edible ingredients, like sugar or gelatin, yes, it could.
Customer Creations Around the Home Get Inspired Business Solutions Small Business Marketing
Rub the front of the stickers. Use a penny or your nail to press on the front of the stickers and rub the surface, so that the tape starts to bind with the ink on the paper. Continue for a couple of minutes to ensure that the ink and the adhesive become one.
Thanks to all authors for creating a page that has been read 626,100 times.
Remove the paper backing. When you’re ready to use the stickers, peel away the paper protective liner and stick them to the surface of your choice.
Use mailing labels. Draw pictures, shapes, or words onto printable mailing labels. These can be purchased at office supply stores. Cut around the shape, then peel the label off. Place the sticker on wax paper if you don’t want to use it right then.
Stickers that you can fully customize are a great tool for both personal and professional use. At StickerYou we fully believe in making your custom message stick in any way you’d like. No seriously, whatever size, shape, colour, design, message, picture, material, occasion, quantity, and anything in between, StickerYou has made it easier than ever before to make your custom stickers exactly the way you want them (we’ve even made it easy for you to find your best sticker type). Dishwasher safe, microwavable, and waterproof, our custom stickers make it stick – absolutely anywhere you need them too.
Make reusable stickers. For stickers, you can pull off and restick, buy some repositionable glue, which can be found at craft stores and online. After designing and cutting your stickers, brush some of the repositionable glue on the back of your sticker.
Let them completely dry. Then stick and peel and stick again!
Die-cut sticker singles are individual stickers that are cut to be the exact shape of your design (no basic squares or circles here). Being that our die-cuts are cut to shape, we think they’re perfect for getting custom exact details for a specific event, or for making a statement anywhere (and since our die-cuts are waterproof we do mean anywhere).
Cover the sticker designs with packing tape. Cut a piece of clear packing tape large enough to cover an entire cut-out design. Place it on the front of the design that you cut or printed out. Press down so that the tape adheres to the design.
When placing the tape on the sticker, make sure to carefully place the tape over the design. Moving the tape after you have started to adhere it can tear the picture. Also, try to not have any bubbles or wrinkles in the tape when you apply it.
Consider using double-sided tape. Double-sided adhesive comes in many forms – rolls, sheets or even sticker maker machines such as Xyron Consider using Washi Tape. Washi Tape is similar to packing tape; it’s great to use for stickers because it sticks when you want, and easily peels off when you want.
If you are looking for a stronger sticker, you could even use duct tape. Washi Tape is available in various colors and patterns.
Design your stickers. Design the stickers on your computer or use markers or a pen to draw directly on the surface of your sticker paper. You’re only limited by the size of the paper – if you want, you could make an 8 1/2″ by 11″ sticker! Design stickers on your computer using Adobe Photoshop, Paint, or another program that allows you to draw.
You could also simply save some photos from your personal album or the internet to use as stickers. When you’re finished, print the sticker designs onto the sticker paper. If you have a physical photograph or drawing that you want to make into a sticker, you can scan it onto your computer or upload a digital photo.
Format this file on Photoshop. Paint, Word, or Adobe Acrobat, then print it onto the sticker paper. Draw directly on the sticker paper with pens, pencils, or even paint. Just make sure you don’t get the paper too wet, or it may interfere with the adhesive.
Get weekly inspiration, fun ideas, and great deals delivered to your inbox!
We love stickers of all shapes and styles, which is why we are going to give you some ways that you can make your own stickers at home. Homemade stickers are a fun activity that the whole family can get involved in, they are also a great way to give a personal touch to a crafty project. Here are two popular methods for creating your own homemade stickers.
Make the glue. This glue is similar to the adhesive on envelope flaps and is safe for kids to use. It will bind the stickers to most surfaces but doesn’t include harsh chemicals. To make the glue, mix the following ingredients in a bowl until they are thoroughly combined: An envelope of plain gelatin 4 tablespoons boiling water 1 teaspoon sugar or corn syrup A few drops of peppermint extract or vanilla, for flavoring.
 Use different kinds of extract for fun flavors! Apply different flavors to different kinds of stickers, make stickers for your friends with surprise flavors, or use certain holiday-themed flavors for Christmas, Valentine’s Day, or Easter.
When you are finished with the glue, store it in an airtight container in the refrigerator. The glue will gel overnight. To liquefy it, place the container in a bowl of hot water. This glue can also be used to seal envelopes.
For this method, you will need to cut out an image that has been printed using water-resistant ink. After you have cut out your image you will then place a piece of packing tape over the image (note: the image should be limited to the size of the packing tape) and press down so that the tape adheres. Next, rub the front of the sticker using a coin so the tape binds to the ink until the adhesive and ink have merged. After the ink and tape have become one, run it under warm water with the paper side facing the stream. The paper should fall apart and dissolve completely but the ink will remain.
No, but there are fabric stickers you iron on to your clothes.
Use a drawing program (examples: Photoshop, MS Paint, Autodesk sketchbook, Painttool SAI) and save your image to your computer. Then print as usual. Another option is to use public domain images or creative commons images, provided you adhere to the license’s end use requirements.
You can copy these images to your computer and enhance them if needed (Pixlr is good for this online), then print as required.
Use a sticker maker. If you want to make a lot of stickers and you’re willing to spend a little more money ($15 – $20), you can buy a sticker maker machine from a craft store or the Internet. Place your sticker (a drawing, a photo, even a ribbon) into the sticker maker and then pull it through the machine.
Some have a crank and you just crank it through, or some you stick it in one side and pull it out the other, and it will apply the adhesive for you. When the stickers run through, they’re ready to use: just peel and stick.
Q: How many custom stickers can I order?A: Absolutely any amount! Our customized stickers have no order minimums, and our kiss cut singles can be ordered in bulk, this allows you to see how your logo or design will appear on different materials and will allow you to order accordingly.Q: I need to order a large amount of custom stickers, which option is best for me?A: It all depends what you need them for. If you’re going to hand out stickers to promote yourself, a business, or an event we recommend our die-cut single stickers and kiss-cut single stickers in bulk because the unique shapes make them stand out and are easy to peel-and-stick anywhere. Our die-cut sticker pages are best if you’re using your stickers for at-home applications or personal use.Q: Can my die-cut stickers have a clear backing?A: Because the vinyl we print our die-cut stickers on is thicker and more durable, our die-cut sticker singles are only available with a white backing. Our custom kiss-cut single stickers can be ordered in bulk in our clear, glossy white, or matte vinyl materials!Q: How many images will fit on a die-cut sticker page?A: There really is no set amount! Depending on the size and quantity of images you want on your die-cut sticker page the amount is up to you! We use a standard 8.5”x10.5” sized sheet so when your images are uploaded to our online editor you’ll be able to change the size and placement of images on your custom sticker sheet. You can make them smaller to fit a lot, or a larger if you only have few. Make some smaller and others larger to have an endless possibility of customized die-cut stickers.Q: Can my custom stickers be used for crafts?A: We think sticker crafts and DIY’s make wonderful gifts and decor. Your customized can be applied to any smooth surface and can be glued or decoupaged in place.Q: I want my custom stickers with both a glossy and clear background, do I have to make two seperate orders?A: Nope! For our die-cut sticker pages and kiss-cut singles you can order multiple vinyl backings that we offer. During the editing process when you’ve finalized your design you’ll be able to choose your custom sticker’s material. From there you can add your quantity to your order and without refreshing the page choose another finish for your custom stickers.Q: How can I make my own stickers on your site?A: The “how to make your own stickers” question is very common and that’s why our platform is so great. Using StickerYou.com you don’t have to speak to a sales rep or wait for a proof. You can upload your artwork and design everything directly on the site and immediately send it to print.
Create stickers with double back tape. Draw your design on any paper, or cut pictures from magazines. After the sticker has been cut to the shape you want, place double back tape on the back of the sticker.
Cut the tape down so it doesn’t go over the sides of the sticker. Place on wax paper until you are ready to use the sticker.
No, this glue will not be strong enough to hold something heavy like a cabochon or bead. This glue only works with permeable surfaces. The glue has to soak between the fibers of the paper in order to adhere.
Buy sticker paper. Craft or office supply stores sell paper that has adhesive on one side. It’s usually lined with a paper backing that you can peel off when you’re ready to use the sticker. Alternately, you can buy tacky sticker sheets.
These sheets allow you to place a picture to the glue, then peel the sticker off, transferring the glue to the back of the sticker. This is great if you want to use sticker sheets with pictures you already have or those cut from magazines.
 Buy paper that fits the specifications of your printer. If you don’t have a printer, you can still use sticker paper by drawing your own designs on the surface of the paper or cutting out pictures from magazines and books.
Deutsch: Aufkleber herstellen, Español: hacer etiquetas adhesivas, Français: faire des stickers, Русский: сделать наклейки, Português: Fazer Adesivos, Italiano: Creare degli Adesivi, 中文: 制作贴纸, Bahasa Indonesia: Membuat Stiker, Nederlands: Stickers maken, العربية: عمل ملصقات, ไทย: ทำสติกเกอร์, Tiếng Việt: Làm hình dán, 日本語: シールを作る
You can put your fingernail under the edge of a corner and then gently pull up.
For this process, you can use whichever materials you want in terms of design, just be sure your drawing utensil is not washable. Draw your design onto a piece of paper and then cut the image out with a pair of scissors. Once you have your image cut out you will need to make your glue. Mix your Gelatin, water, sugar, and vanilla together in a bowl. Store it in an airtight container in your refrigerator to allow the glue to gel overnight. When you need to liquify it for use, just submerge the container in hot water.
I have cabochons. I would like to turn them into stickers. Will any of this be a strong enough binding agent?
Yes, but where you live, you can find these items in a local craft or office supply store.
Lick the stickers. When you’re ready to stick the stickers to various surfaces, simply lick the back, like you would a stamp, and press them down against the surface for a moment. The homemade glue is quite strong, so be careful where you stick them.